Description:
Wodenco SCMT Insert, 90° Square Indexable Carbide Turning Insert. 7° positive flank inserts for semi-finishing and finish turning. Chip breaking in moderate feed range. Positive rake, low cutting forces. Our general-purpose grade is designed to cut most materials including stainless steels, mild steel, brass, bronze, aluminium and cast iron.
Feature:
| Wodenco SCMT Insert | ||||||
| HF | ||||||
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| HF Finishing | SCMT09T302-HF | 9.525 | 9.525 | 3.97 | 4.4 | 0.2 |
| SCMT09T304-HF | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 | |
| SCMT09T308-HF | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| EF | ||||||
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| EF Finishing | SCMT09T302-EF | 9.525 | 9.525 | 3.97 | 4.4 | 0.2 |
| SCMT09T304-EF | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 | |
| SCMT09T308-EF | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| HM | ||||||
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| HM Semi-finishing | SCMT09T304-HM | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 |
| SCMT09T308-HM | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| SCMT120404-HM | 12.7 | 12.7 | 4.76 | 5.56 | 0.4 | |
| SCMT120408-HM | 12.7 | 12.7 | 4.76 | 5.56 | 0.8 | |
| SCMT120412-HM | 12.7 | 12.7 | 4.76 | 5.56 | 1.2 | |
| EM | ||||||
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| EM Semi-finishing | SCMT09T304-EM | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 |
| SCMT09T308-EM | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| SCMT120404-EM | 12.7 | 12.7 | 4.76 | 5.56 | 0.4 | |
| SCMT120408-EM | 12.7 | 12.7 | 4.76 | 5.56 | 0.8 | |
| SCMT120412-EM | 12.7 | 12.7 | 4.76 | 5.56 | 1.2 | |
| HR | ||||||
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| HR Roughing | SCMT09T304-HR | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 |
| SCMT09T308-HR | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| SCMT09T312-HR | 9.525 | 9.525 | 3.97 | 4.4 | 1.2 | |
| SCMT120404-HR | 12.7 | 12.7 | 4.76 | 5.56 | 0.4 | |
| SCMT120408-HR | 12.7 | 12.7 | 4.76 | 5.56 | 0.8 | |
| SCMT120412-HR | 12.7 | 12.7 | 4.76 | 5.56 | 1.2 | |
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| Through slot | SCMT09T304 | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 |
| SCMT120404 | 12.7 | 12.7 | 4.76 | 5.56 | 0.4 | |
| SCMT120408 | 12.7 | 12.7 | 4.76 | 5.56 | 0.8 | |
| Insert shape | Type | Size (mm) | ||||
| L | ΦI.C | S | Φd | r | ||
| Slotless | SCMW060204 | 6.35 | 6.35 | 2.38 | 2.8 | 0.4 |
| SCMW09T304 | 9.525 | 9.525 | 3.97 | 4.4 | 0.4 | |
| SCMW09T308 | 9.525 | 9.525 | 3.97 | 4.4 | 0.8 | |
| SCMW120408 | 12.7 | 12.7 | 4.76 | 5.56 | 0.8 | |
